Product Description
Type 1 Output Port, Wire Lead-out Type Control Output 1 Output Port, Equipped with Short Circuit Protection and Automatic Interference Prevention Indicator Light Red, 4-Segment LED Response Time P0: 25μs, P1: 50μs, P2: 100μs, P3: 200μs, P4: 800μs Output Selection LIGHT-ON/DARK-ON (Selectable via Button) Display Indication Operation Indicator: Red LED, Dual Digital Monitors, Dual 7-Segment Display, Threshold Value (Green LED, 4-Digit) and Current Value (Red LED, 4-Digit) Display Simultaneously. Current Value Range: 0-9999. Detection Method Light Intensity (Supports Area Detection and Automatic Sensitivity Tracking Function) Delay Functions Off-Delay Timer / On-Delay Timer / One-Shot Timer / On-Delay One-Shot Timer Selectable. Timer Duration Selectable: 1ms to 9999ms Output Control NPN/PNP Open Collector, 24V, Max. 100mA (Main Unit Only), Max. 20mA (When Expansion Unit is Connected) Residual Voltage: 1V. Power Supply 12 to 24VDC ±10%, Ripple (P-P): Max. 10% Environmental Class: Class 2 Working Light Intensity Incandescent Light: Max. 20,000 lux Daylight: Max. 30,000 lux Power Consumption Standard Mode: Max. 300mW Maximum Voltage: 24V Vibration Resistance 10 to 55Hz, Double Amplitude: 1.5mm, 2 Hours Each on X, Y, Z Axes Ambient Temperature -10 to +55°C, Non-Freezing
FS-N18 Dual Digital Display Fiber Optic Sensor
Sensitivity Fine Tuning:Pressing the up or down arrow keys directly modifies the set value (as illustrated below).
1.After pressing the key, the screen value will blink, indicating that the set value can now be adjusted.
2.Holding down the arrow key continuously will rapidly increase or decrease the value. The longer the hold, the faster the rate of change.
Adjust the FEC settings of adjacent amplifiers to different parameters (F1, F2, F3, F4) to prevent mutual interference
FS-N18 Dual Digital Display Fiber Optic Sensor
Setting Method for HI and LOW Thresholds in Area Mode:
In display mode, 1 shortly press MODE to enter the HI/Threshold Signal Value mode. At this point, press SET or UPDOWN buttons to set the threshold value. Then, shortly press the MODE button again to switch to the LO/Threshold Signal Value mode, where you can also adjust the high and low thresholds by pressing the SER button or UPDOWN buttons. HI/Threshold indicates the high threshold, while LO/Threshold indicates the low threshold.
Setting Sensitivity Two-Point Calibration:
Step 1: With no workpiece placed in front of the fiber optic head, press the SET button (hold for no longer than 2 seconds).
Step 2: Place a workpiece in front of the fiber optic and press the SET button again (hold for no longer than 2 seconds).
Correct Installation Method 
For DIN Rail Mounting
Align the card slot at the bottom of the main unit with the rail.
For Wall Mounting
Place the module onto the optional mounting bracket, attach them together, and secure with two M3 screws.
Connecting Fiber Optic Module
1.Open the dust cover in the direction indicated by Arrow 1.
2.Move the fiber locking lever downwards in the direction shown by Arrow 2
Connecting Fiber Optic Module
If using a thinner fiber optic module, it is necessary to use the adapter provided with it.
Product Dimensions : 3.2 x 1.2 x 0.5 inches; 2.08 ounces
Item model number : N18
Selling Start Date : November 13, 2024
Manufacturer : BOJKEON
Stock number : CADMW48CJ2
Country of Origin : China
【Modle】The FS-N18 fiber-optic amplifier provides ultra-stable performance and smart tuning for high-speed, reliable detection for standard or demanding applications.
【Supply Voltage】DC 12-24V (brown-positive pole, blue-negative pole, black-signal output).Products include: optical fiber amplifier, product English user manual.
【Simple Setup】One push setting with the PRESET Button，Laser, fiberoptic, and photoelectric models all sharethe same simple functionality.
【Features】 It is a sensor type component with Button ,adjustment switch, output indicator light，HD LED dual digital display and signal strength indicator light, high sensitivity and low delay.
【Scope of application】Fibre optic sensors are suitable for use in a wide range of industries including automotive, liquid crystal, food and pharmaceutical packaging, smartphones and electronics, Position counting ，distinguish colors ，and detect positive negative products，lithium ion batteries and solar cells. (Recommended to use with the store’s optical fiber)
